Sichuan Jianghong Cable Manufacture Co., Ltd.
Committed to manufacturing high-quality optoelectronic cable products,Link the world.
Add to Cart
All Dielectric Self Supporting ADSS Fiber Optic Cable G652D 24 48 72 96 Cores
DESCRIPTION
FEATURES
1. Precise optical fiber length control, ensure that the cable in the design load optical fiber does not force.
2. Precise control of aramid fiber pay-off tension and twisted pitch, improve the fiber optic cable tensile resistance.
3. Reasonable production process makes the outer sheath, aramid fiber, combined closely with the cable conductor, cable structure more compact.
4. Use electric mark excellent material, fiber in high induction electric potential under the environment of more security.
APPLICATIONS
1. The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. For overhead power lines 10kv and 35kv, PE outer sheath is applied
2. FOR power lines 110kV and 220KV, AT outer sheath is applied
3. The dedicate design of aramid quantity and stranding process can satisfy the demand on various spans
PERFORMANCE
| Fiber Characteristic | ||
| Attenuation | 1310nm:≤0.35dB/km | |
| 1550nm:≤0.21dB/km | ||
| Cutoff wavelength | When the cut-off wavelength of the optical fiber cable was tested on a 22 m long cable sample, it was less than 1260 nm. | |
| Bending characteristics | The attenuation characteristic test of 1550 nm was carried out after loosening 100 turns from the bending radius of 37.5 mm, and the attenuation increase value did not exceed 0.05 dB. | |
| Mode field diameter | 1550nm : 10.4±0.5μm | |
| 1310nm:9.1±0.4μm | ||
| Cladding diameter | 125±0.7μm | |
| Cladding non-circularity | <1% | |
| Mode length non-circularity | <6% | |
| Coating diameter | 245±10 μm | |
| Macro-bending radius | 100trun X 30mm @1625 nm | ≤0.05dB |
| Mode field/cladding concentricity deviation | ≤10μm | |
| Mechanical and Enviromental test | ||
| Item | Test method | Acceptance Condition |
| Tensile strength ( IEC60794-1-2-E1) | Load : 2700N | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
| Length of cable: about 50m | ||
| Load time : 1 Min | ||
| Crush test | Load : Short term crush(1100 N/cm) | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
| Load time : 1 Min | ||
| Impact test | Points of impact : 10 | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
| Times per point : 1 | ||
| Impact energy : 10J | ||
| Repeated bending | Bending dynamic radius : 20 D | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
| NO. of cycle : 20 | ||
| Torsion | Length:1m | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
| -Twist angle;±90° | ||
| -No. of cycle:10 | ||
| Water penetration | Height of water : 1m | No water leakage |
| Sample length:3m | ||
| Time :24 h | ||
| Temperature cycling | Temperature :-40~+70ºC | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
| Time of each step:24h | ||
| No. of cycle :1 | ||
| Drip test | 0~70 degree | No filling compound dripping |
| High pressure test | AC10KV , 50Hz | Loss change ≤ 0.05dB@1550nm No fiber break nor sheath damage |
COMPANY PROFILE
SICHUAN JIANGHONG CABLE MANUFACTURE CO.,LTD,was founded in 1992,located in Jiangyou,Sichuan P.R.China.
BY 26 years development,company has become a modernized enterprise focus on development,manufacture of different cables for radio and TV network,Video monitoring network,FTTH communication and smart home network.Based on advanced production equipment,the annual capacity has reached up to 5 minllion km/year.
1. Experience:with more than 20 years production experience on cable industry . certified supplier for broadcasting and communication company in China domestic and overseas market .
2. Production line:supply different cables for radio and TV network , Video monitoring network , FTTH communication ad smart home network .
3. Certificate:Factory got ISO9001:2015 quality management certificate. ISO14001:2015 environmental management certificate and OHSAS18001:2007 occupational health and safety management system certificate
4. High-quality material:With strict supplier control and raw-material inspection .make sure the product quality stable and reasonable cost .offer high-quality fiber from well-know fiber company . offer self-inspection and 3rd-party test report.
5. Service:One stop service at customer’s convenience,offer solution based on customer's request .
6. Price:Reasonable cost based on quality guaranteed product .
